How much time do you spend in the shower each day? If you’re anything like most people, it’s probably somewhere between 5 to 10 minutes. This is why we love products that can make our shower experience more enjoyable and less of a chore! Suction cups are great because they can be used for so many things: keeping towels from slipping on wet floors, hanging up your shampoo and conditioner bottles, and even installing cool new shower head holders. Keep reading to learn everything you need to know about how to make suction cups stick in the shower!
How To Make Suction Cups Stick In The Shower?
A little bit of dish soap
The first trick to making your suction cups stick in the shower is to use a bit of dish soap. Most suction cups, especially the ones designed for the shower, are made from silicone. While silicone is an extremely useful material, it doesn’t stick to a lot of surfaces. If you want to avoid using an adhesive or a mounting plate, there’s a good chance that your suction cups won’t stick to your shower tiles. To make them stick, you’ll want to clean your tiles thoroughly, and then apply a bit of dish soap to each suction cup. The suction cups will stick firmly to the tiles, but they can be removed easily by washing them off with water.
Use a bigger surface area
If you have a hard time getting your suction cups to stay stuck in your shower, it might have something to do with where you’re trying to put them. If you’re mounting a suction cup to a tile, you have a surface area of about 9 square inches. If you’re trying to mount a suction cup to a glass window, the surface area is more like 3 square inches. If you have a hard time getting your suction cups to stay stuck, try mounting them on a bigger surface. This could be as simple as moving the suction cup from a tile to a wall, or it could involve using multiple suction cups to increase the surface area of your mounting point.
Add some weight
If your suction cups don’t want to stick in the shower, the best solution is to add a bit of weight to the mounting point. Most suction cups are designed to be hung from a hook, but not to hold up any weight. A small suction cup on a tile or a window will simply not be able to hold any weight. While it might stick for a few minutes, if you’re in the shower, it will eventually fall off. Adding some weight to your mounting point will increase the surface area of your mounting point and make it significantly more likely that your suction cups will stick. This is best done with a hook that supports a great deal of weight, like a Y-shaped hook.
Use multiple suction cups
If you are having trouble with the suction cups that you’re currently using, you have a few options. You can try a new kind of suction cup, or you can use multiple suction cups. Suction cups are designed to stick to a surface and not to each other, so using multiple suction cups will increase the surface area of your mounting point. If you are trying to mount a hook or something heavy, you should use at least two suction cups to make sure that it stays put. One suction cup might be enough to hold some light fixtures in place, but most things will benefit from the added support of a second suction cup.
Why Won’t Suction Cups Stick?
The surface is too smooth
Suction cups need to have some sort of rough texture on the surface where the suction is formed. This is to grab onto the surface and create a strong seal so that the suction cup doesn’t fall off. But if the surface is too smooth, there’s not enough texture for the suction to hold. This means that the suction cup is unable to form a seal and is therefore useless. Try testing the surface by rubbing your fingers over it to see if it’s smooth enough. If it feels too smooth, then the suction cups aren’t going to work. You can try to roughen up the surface with sandpaper or a nail file. This will give the suction cups a better surface to latch on to.
The suction cup is cracked or broken
If a suction cup is cracked or broken, then it’s pretty much useless. It won’t create a seal and will fall off the surface as soon as you try to use it. You don’t want to use a suction cup that is cracked or broken because you don’t know where the air is escaping to. You could end up with a suction cup that is shooting out the air in all directions and causing more damage than you intended. It’s a better idea to just throw away the suction cup and get a new one that works properly than to risk damaging other things with it. If the suction cup has just been sitting around for a long time, then it could have dried out and become cracked or broken. Try to keep your suction cups in a dust-free environment or in a container with a lid. This will help them to stay moist and last longer. You may need to replace the suction cups more often if you are using them for outdoor use.
There’s too much air pressure
Air pressure is important when it comes to suction cups. The higher the amount of air pressure, the stronger the suction will be. But if there is too much air pressure inside the suction cup, it will pop off the surface as soon as you place it down. This is because the suction cup is being pushed out as soon as it reaches the surface. It’s similar to too much water in a water balloon. You can always take a look at the instructions to see how much air pressure is recommended. Sometimes the packaging will also show what amount of air pressure works the best. You can always start with more air pressure and then go down if it isn’t strong enough.
How To Fix Suction Cup Adhesion Problem?
The surface is too smooth
Suction cups need to have some sort of rough texture on the surface where the suction is formed. This is to grab onto the surface and create a strong seal so that the suction cup doesn’t fall off. But if the surface is too smooth, there’s not enough texture for the suction to hold. This means that the suction cup is unable to form a seal and is therefore useless. Try testing the surface by rubbing your fingers over it to see if it’s smooth enough. If it feels too smooth, then the suction cups aren’t going to work. You can try to roughen up the surface with sandpaper or a nail file. This will give the suction cups a better surface to latch on to.
The suction cup is cracked or broken
If a suction cup is cracked or broken, then it’s pretty much useless. It won’t create a seal and will fall off the surface as soon as you try to use it. You don’t want to use a suction cup that is cracked or broken because you don’t know where the air is escaping to. You could end up with a suction cup that is shooting out the air in all directions and causing more damage than you intended. It’s a better idea to just throw away the suction cup and get a new one that works properly than to risk damaging other things with it. If the suction cup has just been sitting around for a long time, then it could have dried out and become cracked or broken. Try to keep your suction cups in a dust-free environment or in a container with a lid. This will help them to stay moist and last longer. You may need to replace the suction cups more often if you are using them for outdoor use.
There’s too much air pressure
Air pressure is important when it comes to suction cups. The higher the amount of air pressure, the stronger the suction will be. But if there is too much air pressure inside the suction cup, it will pop off the surface as soon as you place it down. This is because the suction cup is being pushed out as soon as it reaches the surface. It’s similar to too much water in a water balloon. You can always take a look at the instructions to see how much air pressure is recommended. Sometimes the packaging will also show what amount of air pressure works the best. You can always start with more air pressure and then go down if it isn’t strong enough.
Final Words
Suction cups are a great way to keep things from falling on the floor, but only if they actually stick to the wall. The most common problem with suction cups is that the wall isn’t smooth enough for the suction cups to create a vacuum seal. To fix this, try using a surface conditioner, checking for textured or porous surfaces, and using the correct type of suction cup. If you’ve tried all of these solutions and your suction cups still won’t stick, it’s time to invest in some new ones.